Size Matters | Ratings Matter | Performance Matters

Why Buy A Process Pump When You Can Buy A True Fire Pump?

Fire Pump

Fire Pump

US Fire Pump HVP

  • 6,250 GPM @ 150 PSI
  • 5,800 GPM @ 175 PSI
  • 5,000 GPM @ 200 PSI

vs

Process Pump

Process Pump

Brand X-Y- Z

  • 6,000 GPM @ 150 PSI
  • 5,000 GPM @ 175 PSI
  • 4,000 GPM @ 200 PSI

Dare To Compare

Fire Pumps vs Process Pumps

Although they appear to be doing the same thing, there is a major difference in performance and flexibility between traditional industrial process pumps and a truly dedicated fire pump. The High Velocity Pump (HVP) is the premiere fire pump solution that out performs process pumps on every level and is changing the industrial firefighting industry.

HVP Fire Pump Advantages Over Process Pumps

  • Better Performance and More Efficient
  • Better Mobility and Flexibility
  • Better Drafting at Higher Lifts
  • Better Flows at High Pressure

There are many drawbacks to using a process pump for industrial firefighting. Process pumps are designed specifically to operate with a fixed flow and pressure entering the pump intake, then adding the power from the drive source at 1750 rpms to produce a fixed flow at a higher pressure coming out of the discharge.

Lift is a problem for process pumps as well because in a normal industrial plant setting, there is no drafting. If a fluid must be raised from a source they would use a vertical turbine pump with the pump head submerged under the water.

The HVP fire pump is different because it is designed to provide smooth and even output while operating from lifts of over 20 feet to pressurized intake supplied over 175psi and everything in-between, while flowing from 5% to 150% of the rated capacity with pressures ranging from 90 to 250psi. This wide range of performance under a wide variety of suction conditions is required to give the fireman the flexibility needed to cover all the emergency conditions they could encounter.

Process Pumps Are Not Ideal For Mobile Applications

Process pumps are a poor choice when being used in any type of mobile firefighting application. Not only are process pumps missing out on maximum flow potential due to bad pump layout, but they also have a larger impeller, increased package size, and inefficient suction intake designs.

The HVP fire pump is designed for mobile firefighting applications and have a variety of available options and features to make the installation and applications work more effectively such as:

  • An all bronze pump end option for operating in sea water conditions
  • A variety of gear ratio options to tailor the pump performance to a variety of engines
  • Mounting points to accommodate vehicle installations
  • Suction intake in line with the impeller eye
  • Rotatable gearbox and volute to accommodate installations
  • Pump end designed to withstand a 500psi hydrostatic test to provide resistance to water hammers
  • A volute and impeller designed to provide the performance flexibly needed for the firefighter under a wide range of conditions
US FIre Pump HVP Lift Test

Proof Is In The Testing

Some people may be skeptical about the performance capabilities of the High Velocity Pump and the equipment it is installed in. No worries, read this UL verification report and see for yourself how our products perform under third party testing.